- Overview
- FAQ
Basic Info.
Model NO.
GY-SW216
Connection Form
Bolt Connection
Member
Steel Column
Type of Steel For Building Structure
H-Section Steel
Carbon Structural Steel
Q355
Residential Wall Structure
Sandwich Panels
Application
Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge, Steel Workshop, Warehouse, Department, Steel Hanga
Material
Steel Structure
Usage
Warehouse, Dormitorie, Offices, Workshop, Hangars
Customized
Customized
Structure Frame
Portal Frame
Software We Used
Auto CAD, Pkpm, Tekla
Steel Code
Q355 & Q235
H Steel Type
Hot Rolled H-Beam or Welded H Beam
Wind Loading
80km/H-120km/H, or as Client′s Requirement
Snow Loading
as Per Customer′s Requirements
Seismic Grade
7 Grade
Connection Method
Bolts Connection
Cladding Materials
Single Corrugated Steel Sheet, Sandwich Panels
Structure Surface Treatment
Any Color Painting or Hot Galvanize
Transport Package
Nude Package or Chassis Package
Specification
Customized size
Origin
Foshan, China
HS Code
9406000090
Production Capacity
2000 Tons Per Month
Product Description
Advantages of Steel Structure Building
1. Flexible layout
2. Good ductility, strong plasticity, and deformability, high seismic resistance, and wind resistant
3. Quickly build and long service time
4. Lightweight, high quality, and low cost
5. Environmental friendly, the materials are 100% recycled or degraded
3. Quickly build and long service time
4. Lightweight, high quality, and low cost
5. Environmental friendly, the materials are 100% recycled or degraded
| Steel Frame | Steel Column | Hot rolled H-beam or welded H beam, size will be calculated by our engineers team according to the building size | Q355B | |
| Steel Beam | Q355B | |||
| Wind Resist Column | Q355B | |||
| Connected Plate | The thickness will be calculated by our engineers team according to the building size | Q355B | ||
| Tie Bar | ¢89*3 | Q235B | ||
| Horizontal Support | ¢20 Round steel | Q235B | ||
| L Shape Steel for Bracing | L50*3 | Q235B | ||
| Roof Purlin | C160*50*20*2.0 or other sizes depend on different conditions | Q235B galvanized | ||
| Wall Purlin & Canopy Beam Purlin | ||||
| Structure Surface Treatment | Any color painting or hot-dip galvanize | |||
| Roof Claddings | Corrugated Steel Sheet | L*840, the thickness can be 0.426mm, 0.476mm, or other thickness as discussed | |
| EPS Sandwich Panel | L*1050*50mm/75mm/100mm, skin sheets thickness can be 0.426mm, 0.476mm, or other thickness as discussed | ||
| Rock Wool Sandwich Panel | L*960/950*50mm/75mm/100mm, skin sheets thickness can be 0.426mm, 0.476mm, or other thickness as discussed | ||
| PU Sandwich Panel | L*960/950*50mm/75mm/100mm, skin sheets thickness can be 0.426mm, 0.476mm, or other thickness as discussed | ||
| Wall Claddings | Corrugated Steel Sheet | L*840, the thickness can be 0.426mm, 0.476mm, or other thickness as discussed | |
| EPS Sandwich Panel | L*1150/950*50mm/75mm/100mm, skin sheets thickness can be 0.426mm, 0.476mm, or other thickness as discussed | ||
| Rock Wool Sandwich Panel | |||
| PU Sandwich Panel | |||
| Covering Accessories | Including the sealing covering, glue, hardware, etc. | ||
| Water Gutter | 0.8mm stainless steel | ||
| Water Pipe | D110 or D160 depends on the building size | ||
| Embedded Bolts | M24 or other size depends on the building size | ||
| Turnbuckles Bolts | M20 other size depends on the building size | ||
| High strength Bolts | M20*80 other size depends on the building size | ||
| Normal Bolts | M20*55 other size depends on the building size | ||
| Normal Bolts | M12*35 other size depends on the building size | ||
| Steel Rod | ¢12 | ||
| Rolling Gate | 4000mm*5000mm(high) or depends on the client's requirement | ||
| Automatic Machine for Rolling Door | |||
| Canopy | Size depends on the building size | ||
| Ventilation Materials | Ventilation balls by nature wind | ||
| Industrial fans by power | |||
| Steel Door for Man | 880W*2050H | ||
| Aluminum Sliding Window | 1500mm*3000mm or depends on the client's requirement | ||
Our Service
Professional design and engineering team
The full solution for house design. We could make the design for the whole house as per your requirement.
Procurement and Manufacture of all materials for prefabricated building
We have a professional procurement team to make sure all the materials are of good quality. Our factory operates under ISO standards, to make sure the fabrication works with high technology.
Site management & Installation supervision
We could send our engineers to help with the installation supervision, you just need to prepare a team that knows normal construction works will be OK.
What Factors Should You Consider in Customizing the Prefab House?
1. The local weather conditions. We need to know the wind speed, the snow loading (if it's a snowing area), and the Seismic rating.
2. The size of the land can be for this building.
3. The purpose of the building, like do you need it for labor accommodation, office, or steel frame workshop, etc.
How Do We Design a Factory for You?
Our excellent design team will design the steel structure workshop warehouse for you. If you give the following information, We will give you a satisfying drawing
1. Location (where will be built? ) _____country, area
2. Size: Length*width*height _____mm*_____mm*_____mm
3. Wind load (max. Wind speed) _____kn/m2, _____km/h, _____m/s
4. Snow load (max. Snow height) _____kn/m2, _____mm
5. Anti-earthquake _____level
6. Brick wall needed or not If yes, 1.2m high or 1.5m high
7. Thermal insulation? If yes, EPS, fiberglass wool, Rockwool, and PU sandwich panels will be suggested; If not, the metal steel sheets will be okay.
The cost of the latter will be much lower than the former.
8. Door quantity & size _____units, _____(width)mm*_____(height)mm
9. Window quantity & size _____units, _____(width)mm*_____(height)mm
10. Is Crane needed or not? If yes, _____units; max lifting weight____tons; max lifting height _____m
Q: What's the quality assurance you provided and how do you control quality?
A: We establish a procedure to check products at all stages of the manufacturing process - raw materials, in-process materials, validated or tested materials, finished goods, etc. SGS, BV, and other testing are available.
Q: Can you offer a design service?
A: Yes, we have an excellent design team. We could design full solution drawings as per your requirements.
Q: Do you offer installation guidance on-site overseas?
A: Yes, usually we will send you the detailed installation drawing and videos. However, we can provide the installation service, supervision, and training by extra if needed.
1. The local weather conditions. We need to know the wind speed, the snow loading (if it's a snowing area), and the Seismic rating.
2. The size of the land can be for this building.
3. The purpose of the building, like do you need it for labor accommodation, office, or steel frame workshop, etc.
How Do We Design a Factory for You?
Our excellent design team will design the steel structure workshop warehouse for you. If you give the following information, We will give you a satisfying drawing
1. Location (where will be built? ) _____country, area
2. Size: Length*width*height _____mm*_____mm*_____mm
3. Wind load (max. Wind speed) _____kn/m2, _____km/h, _____m/s
4. Snow load (max. Snow height) _____kn/m2, _____mm
5. Anti-earthquake _____level
6. Brick wall needed or not If yes, 1.2m high or 1.5m high
7. Thermal insulation? If yes, EPS, fiberglass wool, Rockwool, and PU sandwich panels will be suggested; If not, the metal steel sheets will be okay.
The cost of the latter will be much lower than the former.
8. Door quantity & size _____units, _____(width)mm*_____(height)mm
9. Window quantity & size _____units, _____(width)mm*_____(height)mm
10. Is Crane needed or not? If yes, _____units; max lifting weight____tons; max lifting height _____m
Q: Are you a factory?
A: We are a manufacturing factory. And you are welcome to visit us. The quality control flow will show you our professionalism. Also, you will enjoy the best quality and competitive price.Q: What's the quality assurance you provided and how do you control quality?
A: We establish a procedure to check products at all stages of the manufacturing process - raw materials, in-process materials, validated or tested materials, finished goods, etc. SGS, BV, and other testing are available.
Q: Can you offer a design service?
A: Yes, we have an excellent design team. We could design full solution drawings as per your requirements.
Q: Do you offer installation guidance on-site overseas?
A: Yes, usually we will send you the detailed installation drawing and videos. However, we can provide the installation service, supervision, and training by extra if needed.